{"id":16750,"date":"2015-12-28T11:50:47","date_gmt":"2015-12-28T20:50:47","guid":{"rendered":"http:\/\/danbaileyphoto.com\/blog\/?p=16750"},"modified":"2017-11-27T10:06:50","modified_gmt":"2017-11-27T19:06:50","slug":"shooting-off-camera-flash-with-the-fuji-x-t1","status":"publish","type":"post","link":"https:\/\/danbaileyphoto.com\/blog\/shooting-off-camera-flash-with-the-fuji-x-t1\/","title":{"rendered":"Shooting Off Camera Flash with the Fuji X-T1"},"content":{"rendered":"

\"DSCF9761\"<\/a>One of the big questions that many photographers have regarding the Fuji X-T1 and the other X Series cameras, is how well they work\u00a0with flash, especially of-camera flash.<\/p>\n

While Fuji does have a few flashes in their lineup, they don’t (yet) have anything as advanced as the Nikon CLS system, which features things like TTL monitor pre flashes and infrared triggers.<\/p>\n

However, Fuji built the X Series cameras to be compatible with most of the wired and wireless flash systems. They work with PocketWizards, Cactus triggers, and both\u00a0Canon and Nikon sync cords. I’ve even used my Nikon SB units in the hot shoe of the X-T1 and they work fine.<\/p>\n

Keep in mind, they only work in Manual flash mode. You can’t pair a Nikon\u00a0or Canon speed light with the X-T1 and expect full TTL,\u00a0but you can\u00a0use it as a main flash, and you can even use it to fire other flashes.<\/p>\n

However, anyone who follows the work of Strobist David Hobby knows that Manual flash\u00a0is hardly a limitation. You can do amazing work with one or more flashes that are all set to M.<\/p>\n

In this post, I’ll just cover a couple of techniques you can use when shooting off camera flash with the Fuji X Series cameras. For both of these examples, I’m using the flagship X-T1. It has a sync speed of 1\/180, which isn’t bad. 1\/250 would be nice, but for most things, 1\/180 works just fine.<\/p>\n

Wireless Radio Triggers<\/h2>\n

In\u00a0these first two snow biking images, I’m using the X-T1 camera<\/a> with the XF 50-140 f\/2.8 lens<\/a>. For the light, I have a Nikon SB-900 that’s fit inside a Photoflex 3-foot OctoDome softbox<\/a>. I’m a huge fan of Photoflex soft boxes<\/a>, they’re relatively inexpensive, quite portable, and very durable. Believe me, I’m pretty hard on my gear and the Photoflex stuff holds up to a great deal of abuse.<\/p>\n

\"DSCF9758\"<\/a>To trigger the flash, I’m using a pair of PocketWizards. Old ones. Plus II models that I’ve had for about fifteen years. They’re simple and very reliable, as are any of the PW Plus Series.<\/p>\n

If you’re new to radio triggers, the new PocketWizard PlusX<\/a> models are a great value. You can get a pair of them for about half the price of what a single Plus II model used to cost.<\/p>\n

If you need multiple channels and longer range the Plus III<\/a> is the way to go, but for most flash work you’ll probably do, a simple trigger, inexpensive trigger like the Yongnuo RF-603 II<\/a> will work just fine. You can get a pair of wireless triggers and be off camera flashing for only 30 bucks. Plus they’re tiny.<\/p>\n

I’ve never used the Cactus triggers, but from everything I’ve heard, they’re really good, reliable solutions for off camera flash. The latest ones are the Cactus v.6 models.\u00a0<\/a>As you can see, there a lot of options.<\/p>\n

In this first example, I’ve set the camera to Tungsten White Balance.\u00a0<\/strong>Then I use an orange CTO gel on the flash, which counteracts the blue.<\/p>\n

Why switch the while balance? The effect will be that everything lit with the flash will look\u00a0normal, while the background retains\u00a0a cool, moody blue light. It’s a nice effect that can give\u00a0you a very interesting look.<\/p>\n

At left, you see in this shot above, the scene with Tungsten WB and no flash. Its really dark inside the forest on a winter day, which gives the scene a very drab look. Not so good. A perfect scene for adding flash. Here, I placed the flash inside the trees just off the trail, so that it would hit the biker from 90 degrees as she rode by.<\/p>\n

Of course, this technique can be tricky. Since you may only have one shot each pass, you’ll \u00a0have the nail the timing, or you’ll miss the light. Focus can be tricky too. Here, I put the X-T1 in AF-C AF tracking mode,\u00a0and the 50-140 had no trouble finding and locking on the subject while she rode up and down the trail. In some situations, you may need to pre-focus on a set point and then fire the shutter just when the subject reaches that point.<\/p>\n

Camera and flash exposure was set as follows: 1\/180 sec. @ f4, Manual Exposure mode, with flash set at around 1\/8 power.<\/strong>\u00a0It always takes a few test shots to figure out the appropriate flash sheeting. That big 3′ OctoDome puts out a lot of light, so I didn’t need very much coming out of the flash. Plus, its angled the light up quite a bit so that it wouldn’t blast\u00a0too much onto the snow, since its\u00a0got such a wide wrap. A grid would have worked well here.<\/p>\n

Here’s the scene with not quite enough light, I think set at 1\/32 power, and then the final version.<\/p>\n

\"DSCF9738\"<\/a> \"DSCF9761\"<\/a><\/p>\n

Cloudy White Balance<\/h2>\n

Sometimes Tungsten White Balance doesn’t always look quite right. For this next scene, I switched to Cloudy White Balance and removed the orange gel from the flash. Here are the two versions to show you the difference, as well as my light placement. Flash exposure was set to around 1\/8 power, and in the final shot, I dropped the shutter speed to 1\/60 sec. in order to show a little bit of motion in the subject.<\/p>\n

For this scene, the crux wasn’t focus, it was timing. It took a few passes in order to get the right framing where the biker was on the right side of the frame and the flash wasn’t in the picture. Flash photography often\u00a0takes a certain level of trial and error and trying things a few times before you nail it.<\/p>\n

For both of these two scenes, I’m using gear that all fits\u00a0inside, or strapped to the side of my photo pack. That’s why I call it “going fast with light.”<\/p>\n

\"DSCF9770\"<\/a> \"DSCF9794\"<\/a>\"DSCF9809\"<\/a><\/p>\n

Using One Flash to Trigger Another Flash<\/h2>\n

For these last couple of shots, I used a pair of bare bulb\u00a0Nikon SB-700 Speedlights<\/a>, one sitting in the hot shoe of the X-T1, and the other held by a friend off to the side. The flash in the hot shoe was set to Manual mode and a very low power setting, around 1\/128. Its job is not to light up the main subject, but to trigger the second off-camera flash. It was\u00a0swiveled to point directly at the second flash.<\/p>\n

The second SB-700 was zoomed to around 85 mm, to get a nice strong\u00a0direct beam of light, and set to SU-4 mode, which is Optical Slave Mode. In this mode, the flash fires whenever it ‘sees’ the light from another flash. So, you could use ANY\u00a0flash in the hotshoe, and for a second light, any\u00a0flash that has\u00a0a wireless slave mode. Your best value is probably the Lumopro LP180 Strobist model<\/a>. Nissen recently released the\u00a0i40 Flash for Fuji<\/a>. You can read a review of this flash on Fstoppers<\/a>.<\/p>\n

For\u00a0of these scenes, I used Auto White Balance\u00a0white balance and the orange CTO gel on the flash. Again, the X-T1, but this time, I’ve switched to the Fuji XF 90mm f\/2 lens<\/a>.<\/p>\n

\"DSCF0205A\"<\/a>\"DSCF0210\"<\/a>\"DSCF0211\"<\/a><\/p>\n

So, to wrap up, your flash options using the Fuji X-T1, or any of the Fuji X Series cameras, is pretty much wide open. Although you lack the precise remote control of the Nikon CLS system, you can do a lot with Manual flash. Really, the limitation of manual is that you have to walk around and change each light by hand, so basically, we’re just talking time. Once you’ve got it all dialed in, the\u00a0light quality is exactly the same.<\/p>\n

When I sold all of my Nikon DSLR\u00a0last year, I kept all of my Nikon flashes, because they still work fine with my Fuji system, and as you can see, in a\u00a0number of ways. Really, all you need to get going is a single flash and either a sync cord or a couple of triggers. After that, it’s all about experimentation.<\/p>\n

For further and expansive reading on off-camera flash techniques in the outdoors, check out my eBook, Going Fast With Light<\/strong><\/a>. While the gear might very, all of the techniques I describe in my eBook are applicable with both DSLR gear and mirrorless cameras. And it’s on sale right now<\/a>.<\/p>\n

<\/div>\n